Protect your generator's engine, the heart of your power system, with the genuine Generac Low Oil Pressure Switch, Part #0L2917C.This critical safety component is designed to constantly monitor your engine's oil pressure and initiate an emergency shutdown if pressure drops below a safe operating threshold, preventing catastrophic and costly engine damage.
Installing this OEM-specification switch ensures reliable performance and restores the factory safety protocol for your Generac unit.
Engine Protection: Triggers a shutdown of the generator engine if oil pressure falls below the safe level, preventing overheating and damage due to insufficient lubrication.
Actuation Pressure: Calibrated to actuate at 10 PSI (Pounds per Square Inch).
Switch Type: Normally Closed (NC) configuration. This means the switch is closed (allowing current to flow, keeping the generator OFF) until the required 10 PSI of oil pressure is achieved, which opens the switch (allowing the generator to run).
OEM Quality: A genuine or OEM-spec replacement part, ensuring precise fit, function, and long-lasting durability within Generac systems.
Thread Specification: Features standard threading, often 1/4"-18 NPT or similar, for direct installation into the engine block (consult your specific model manual).
Routine Maintenance: Replacing an older or worn oil pressure switch as part of preventative engine maintenance.
Troubleshooting: Fixing a generator that is frequently shutting down and displaying a low oil pressure fault code.
Repair Projects: Restoring the safety functions to Generac generators that have been confirmed to have a faulty or leaking oil pressure switch.
The Generac Part #0L2917C is a widely used oil pressure switch compatible with a large number of Generac generators, including many air-cooled residential and commercial models.
Direct Replacement for Generac Part Numbers: This switch is commonly referenced as a replacement for older part numbers such as 0C3025, 0C30250SRV, and 0G6820.
Generac-Branded Units: Often compatible with generators branded as Guardian, Centurion, Watchdog, Carrier, Siemens, and Honeywell that require a 10 PSI, Normally Closed (NC) switch.
Protect your generator's engine, the heart of your power system, with the genuine Generac Low Oil Pressure Switch, Part #0L2917C.This critical safety component is designed to constantly monitor your engine's oil pressure and initiate an emergency shutdown if pressure drops below a safe operating threshold, preventing catastrophic and costly engine damage.
Installing this OEM-specification switch ensures reliable performance and restores the factory safety protocol for your Generac unit.
Engine Protection: Triggers a shutdown of the generator engine if oil pressure falls below the safe level, preventing overheating and damage due to insufficient lubrication.
Actuation Pressure: Calibrated to actuate at 10 PSI (Pounds per Square Inch).
Switch Type: Normally Closed (NC) configuration. This means the switch is closed (allowing current to flow, keeping the generator OFF) until the required 10 PSI of oil pressure is achieved, which opens the switch (allowing the generator to run).
OEM Quality: A genuine or OEM-spec replacement part, ensuring precise fit, function, and long-lasting durability within Generac systems.
Thread Specification: Features standard threading, often 1/4"-18 NPT or similar, for direct installation into the engine block (consult your specific model manual).
Routine Maintenance: Replacing an older or worn oil pressure switch as part of preventative engine maintenance.
Troubleshooting: Fixing a generator that is frequently shutting down and displaying a low oil pressure fault code.
Repair Projects: Restoring the safety functions to Generac generators that have been confirmed to have a faulty or leaking oil pressure switch.
The Generac Part #0L2917C is a widely used oil pressure switch compatible with a large number of Generac generators, including many air-cooled residential and commercial models.
Direct Replacement for Generac Part Numbers: This switch is commonly referenced as a replacement for older part numbers such as 0C3025, 0C30250SRV, and 0G6820.
Generac-Branded Units: Often compatible with generators branded as Guardian, Centurion, Watchdog, Carrier, Siemens, and Honeywell that require a 10 PSI, Normally Closed (NC) switch.
